Description
About This Product
Description
MB Quart RA1-280.4 Reference 280 Watt 4-Channel Amplifier
MB Quart Reference series four channel car audio amplifier featuring innovative sound quality and power technology. The RA1-280.4 is a 280 watt car audio amplifier. Reference amplifiers feature DC Sensing to allow any amplifier to be easy integrated into an OEM system by simply adapting a RCA cable from the source unit.
Low Noise Preamplifier Circuit
Q-Stasis Pre Amplifier Stage: Maximum low voltage signal from the source unit comes into the amplifier circuit with minimal distortion.
RCA Inputs
Nickel-Plated: High temperature impact resistant with hex screw terminals that allow for secure connections and is erosion resistant.
High Level Inputs
See Auto-Sense Feature.
Operation Mode
2 / 4 Channel
Crossover Type
Variable electronic crossovers allow for complete control of the sound.
Electronic Equalizer
Control of amplifier output with on-board electronic crossover to tailor specific frequencies to speakers and subwoofers. Check specifications for specific frequencies for this amplifier.
Class / Topology
Innovative use of Class SQ (Class D) for full range and a Class Q1 (Class-D) amplifier to drive the subwoofer frequencies.
Output Device Technology
FLUID-FETS: MB Quart output devices, FLUID-FETS are painstakingly selected for their ability to efficiently produce power and mimic the sound quality of the highest end home amplifiers.
Heat Sink
Aluminum: Quickly dissipates heat to allow the amplifier to run lower impedance for longer duration.
Power Supply
Rugged MOSFET Pulse Width Modulation power supply: Allows amplifier to produce efficient power without taxing the vehicle electrical system.
Output Connections
Heavy duty connections allow for secure electrical signal to pass into wiring and resist erosion which will add longevity to the amplifier.
Connection Type
Secure connection for all power, ground and speaker connections.
Bass Remote Included
Included: Wired Bass Remote allows adjustments to bass frequencies to be made from the control mounted anywhere in the vehicle.
Auto Turn-On
DC SIGNAL SENSE: The DC SIGNAL SENSE switch will allow the amp to turn on when a signal is received on the RCA inputs, so an amplifier remote turn on wire is not needed to turn on the amplifier. This feature can also be turned off.
Specifications
Weight: 6.3 lbs
Dimensions: 15 × 8.5 × 4 in
Class: Class SQ (Class D)
Total Channels: 4
Max Power (watts): 280
Power @ 2 Ohms (ch x watts): 4 x 70
Power @ 4 Ohms (ch x watts): 4 x 50
Crossover: Electronic
Variable High Pass Crossover 12dB per Octave: CH1 & CH2: Switched Full/HPF/LPF 50Hz-250Hz, CH3 & CH4: Switched Full/HPF/LPF 50Hz-250Hz
Variable Low Pass Crossover 12dB per Octave: CH1 & CH2: Switched Full/HPF/LPF 50Hz-250Hz, CH3 & CH4: Switched Full/HPF/LPF 50Hz-250Hz
Bass Boost: 0-9dB
Subsonic Filter: N/A
Variable Voltage: 0.02-9V
Signal to Noise: > 101dB
Frequency Response: 10Hz-35Hz
Total Harmonic Distortion (THD):
Speaker Level Audio Inputs: RCA
Power Terminal 12v/GND: 4 AWG
Speaker Terminal Wire Gauge: 12 AWG
Fusing: 40A External
Reviews
There are no reviews yet.