Evolution C3-650 6.5" Component Speaker System | Component Systems

Description

About This Product
Description
JL Audio Evolution C3-650 6.5" Component Speaker System
There are times when an installation calls for a separate woofer and tweeter and other times when a coaxial is the better approach. With the Evolution® C3 Convertible Component Systems, the same product can be deployed in either configuration, delivering outstanding audio power and quality in each application.
The C3-650 system features 6.5-inch (165 mm) component woofers with oversized 1.2-inch (30.5 mm) voice coils, mineral-filled polypropylene cones and injection-molded polymer baskets. The woofer design benefits from JL Audio’s vast woofer design experience and advanced modeling systems.
The C3 tweeters are built with 1-inch silk dome diaphragms that deliver powerful, extended response, on and off axis. Flush-mounting and surface-mounting fixtures are included to fit a wide variety of installation needs. They can also be mounted onto the woofers in a coaxial format using the included fixtures.
C3 crossover networks are compact and built with premium component parts, including Mylar® capacitors and segmented air-core inductors. Four levels of tweeter attenuation are provided, as well as three levels of mid-range presence adjustment, for twelve possible voicing combinations!
Woofer grilles are included, each consisting of a black grille tray and a black steel mesh grille with an electroformed JL Audio logo.
General Specifications
Continuous Power Handling (RMS) 75 W
Peak Music Power 225 W
Recommended RMS Amplifier Power (per Ch.) 25 – 150 W
System Efficiency 90.0 dB @ 1 W / 1 m
System Nominal Impedance 4 Ω
System Frequency Response 48 Hz – 25 KHz ± 3 dB
Woofer Physical Specifications
Frame Outer Diameter (A) 6.50 in / 165 mm
Grille Tray Outer Diameter (B) 6.74 in / 171 mm
Rear Cover Outer Diameter (C) 4.08 in / 104 mm
Frontal Coaxial Tweeter Protrusion* (D) 0.75 in / 19 mm
Frontal Grille Protrusion** (E) 1.03 in / 26 mm
Mounting Hole Diameter (F) 5.56 in / 141 mm
Mounting Depth (G) 2.55 in / 65 mm
*Frontal coaxial tweeter protrusion measured from mounting surface
**Frontal grille protrusion measured from mounting surface
Tweeter Physical Specifications
Flush Mount Fixture Diameter (A1) 2.12 in / 54 mm
Surface Mount Fixture Diameter (A2) 1.93 in / 49 mm
Flush Mount Mounting Hole Diameter (B) 1.875 in / 48 mm
Flush Mount Fixture Mounting Depth (C) 0.71 in / 18 mm
Flush Mount Tweeter Frontal Protrusion (D1) 0.32 in / 8 mm
Surface Mount Tweeter Frontal Protrusion (D2) 0.95 in / 24 mm
Crossover Physical Specifications
Width (W) 3.36 in / 85 mm
Height (H) 1.44 in / 37 mm
Depth (D) 4.72 in / 120 mm